CANOPY STEELTOP® EXECUTIVE - Ford Ranger 'Next Gen'
PART NUMBER:
ST223L-PMYHR
PART NUMBER:
ST224L-PNZAT
PART NUMBER:
ST223L-PN4E3
PART NUMBER:
ST224L-PN4E3
PART NUMBER:
ST223L-PN4GD
PART NUMBER:
ST224L-SW5
PART NUMBER:
ST223L-PNZAT
PART NUMBER:
ST224L-PMYHR
PART NUMBER:
ST224L-PN4GR
PART NUMBER:
ST223L-PMYHT
PART NUMBER:
ST223L-PN4FU
PART NUMBER:
ST223L-PN4GR
PART NUMBER:
ST223L-PN4JP
PART NUMBER:
ST224L-PMYHT
PART NUMBER:
ST223L-A4D
PART NUMBER:
ST224L-A4D
PART NUMBER:
ST224L-PN4FU
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Price:
$4,640.00 incl. GST
Excludes freight and installation
Stock Level
This product is currently unavailable for online purchase.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removedt
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removedt
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc with factory rail caps
If fitting without railcaps (e.g. wildtrak), please contact us first
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
V2 EXECUTIVE STEELTOP® CANOPY
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
Ford Ranger Ute Canopy - For the next generation
Designed to fit with XLT. SPORT etc
Side rail cap will need to be removed
Note:
It is a requirement by Ford NZ that all Rangers (2022 onward) fitted with any canopy, must have the Ford 'load box reinforcement bracket' system installed.
This can be supplied and installed at your Ford dealer. The listed part numbers from Ford Motor Company are: VN1WJ27726A for the Ford Ranger and VN1WZ2627726B for the Ford Raptor.
These brackets have been developed by Ford to brace the tray floor to the tray wall. We strongly recommend that the J-Braces are used when installing a canopy to a Next-Gen Ford Ranger and Raptor as per Ford Motor Company's requirements.
Please consult with your Ford dealer for supply and installation.
The V2 Executive is a SteelTop® ute canopy with in a more traditional design but with the same great SteelTop® features and benefits:
Plus the added benefit of central locking on all three sides!.
Strong lightweight Pressed Steel Construction
Central locking all sides (lock your car and the canopy locks!)
One touch release for side lift windows
Roof-rack Rails (100kg load rated at motion. 200kg at standstill great for roof tents etc)
Baked Paint System Colour Matched
Secure. Twin locks with single central door release on rear door
Secure. no exterior handle on the sides
Full interior lining. Easy clean/wash
Interior light (operated off rear door) on/off/door settings
Internal door release
Rear glass mounted in steel frame
Rear Handle mounted in frame (not glass)
Non-drip door
Clear front sliding window
Weatherproof.
Integrated cover-rail between canopy and tray for professional finish (hides unsightly join common with other canopies)
V2 Executive SteelTop® models are fitted with tinted dual side lifting windows as standard.
