BED RAIL CAP - 1 PIECE - FORD RANGER
Excludes freight and installation
Description
RAIL CAPS
Manufactured in USA - Bushwacker brand
Airplex Rail Caps offer protection for the top of the wellside. Often a vehicle may be supplied with no protection on the top of the wellside where you often reach over or rest a load. These can be fitted with most under rail style liners or on vehicles with no liner at all.
The Rail Caps are manufactured from the same tough material as the bedliner.
- 1 piece - for the tailgate only
The wellside rail caps are attached with 3m® adhesive tape
Bushwacker ute tray protection.
Designed to suit: Ford Ranger PX, PX2, PX3
NOTE: Modification might be required when fitting with some bedliners.
If you have a bedliner fitted, the bedliner may interfere with the install of the tailgate rail cap protector. There are various bedliners fitted by Ford and aftermarket.
You may be able to slip the rail cap under the bedliner.
or alternatively, the inner edge if the rail cap may be trimmed (with craft knife) to fit just above the bedliner.
